Changing The Size Of Tray 6 (High Capacity Feeder) - Xerox Document Centre 706 Series User Manual

Changing the size of tray 6 (high capacity feeder)

G Tray 6 (high capacity feeder) is
optional.
G Paper jam may occur if paper size
has not been changed correctly.
This section explains the procedures for changing the paper sizes to be
loaded in tray 6 (high capacity feeder).
Paper sizes that can be loaded are B5 , A4 , and 8.5 x 11" .
Procedure
Pull tray 6 (high capacity
feeder) out slowly until it
stops.
When pulling out a
paper tray, do it
slowly. If pulled out
with too much force,
the tray can hit and
injure your knees.
Remove any paper still in
the tray.
Turn the screw to remove
the inner guide.
Adjust the inner guide to
the hole and fasten the
screw. When changing to
A4 or 8.5 x 11" ,
proceed to Step 7.
G
Loading Paper
2-4 Changing the Paper Tray Size
G
2
37