Enabling/Disabling Auditron - Xerox Document Centre 706 Series User Manual

G The factory default is Off.
G The screen on the right has the
Auditron mode enabled.
G If you made a mistake while entering
the access number, press the Clear
C button to clear and re-enter.
G 9-8 Changing the Auditron Access
Number for information on how to
change the access number.

Enabling/Disabling Auditron

This section explains the procedures for enabling/disabling the Auditron
Mode. If Auditron Mode is set to On in Auditron Setup, then the Auditron
Mode is enabled. In this case, the Password Entry screen will appear when
the machine is switched on.
Procedure
Press Settings/Meter Check.
Select Auditron Admin. Mode.
Enter the access number of the Auditron Administrator and
select Confirm.
Each input digit is represented by an asterisk.
G
Using the Auditron Feature

9-6 Enabling/Disabling Auditron

G
9
235