G
G
Daily Care
Cleaning document cover, document/scanning glass
G The document cover is the part
where the DADF belt is.
G If the document cover or glass is
dirty, copies made will also be dirty
and it may affect the automatic
sensing of document sizes.
G If the scanning glass of the DADF is
dirty, it will cause document jams
and result in dirty copies being
made.
G Plastic and painted parts may be
damaged if you use benzine or
thinner to clean the machine.
G If too much water is used, it will
damage the document or cause the
machine to fail.
G Use a cloth that has been wrung
thoroughly and does not drip. Water
8
droplets seeping into the machine
will cause it to fail.
8-1 Cleaning the Copier
200
Cleaning the Copier
In order that clean copies can be made each time, you are recommended to
clean the following areas of the machine once a month.
Document cover/Document glass/DADF scanning glass
G
DADF film/roller sections
G
Procedure
Lift the DADF slowly.
DADF will be stationary if fully
open.
Use a cloth made of soft
material, and moistened
with mild detergent.
Clean the document glass.
Clean the document cover.
Clean the DADF
scanning glass.