Xerox Document Centre 706 Series User Manual page 33

G The System Administrator can use
the Tools Mode to select the screens
to be displayed. See sections on
Feature Defaults and Screen Layout
in 6-1 List of Custom Preset
Functions for details.
G The screen on the right has the multi-
tray, tray 6 (high capacity feeder),
and finisher installed.
G The screen on the right has the
finisher installed.
Changing the display screen
Four screens are available for selection on the display. They are the Basic
Features screen, Customised Features screen, Features Menu screen and
Stored Jobs screen.
Select the Basic Features, Customised Features, Features Menu or Stored
Jobs button located on the right of the display. The corresponding screen of
the selected button will be displayed. The factory default screen when you
switch on the power is the Basic Features screen.
The features on the Basic Features screen and the Customised Features
screen are also shown on the Features Menu screen. Select the screen that
best meets your operating requirements.
Basic Features (factory default)
Customised Features (factory default)
Features Menu
Stored Jobs (factory default)
G
Getting to Know Your Copier
1-3 Using the Touch Panel Display
G
1
9