Xerox Document Centre 706 Series User Manual page 58

G G
Loading Paper
G If the guide is not fastened properly,
paper jam may occur.
2
G If the first or the second tray is lifted,
make sure that it is returned to the
correct position.
G The screen on the right has the
Auditron mode enabled. See
Chapter 9 Using the Auditron
Feature for details.
34 2-4 Changing the Paper Tray Size
Tighten the screw in the
long narrow opening of the
guide with a screw driver
as shown in the diagram.
Paste the paper size label
and re-load the paper.
Return the cover and the
tray to their original
positions.
Close the tray cover and
push the multi-tray in
slowly until it stops.
Press Settings/Meter Check on the control panel.
Select Tools Mode.