Xerox Document Centre 706 Series User Manual page 2

This equipment is certified by the Japan Electrical Safety & Environment Technology Laboratories in compliance with IEC60950
(AS/NZS3260). The equipment is manufactured under a ISO 9002 Quality System certified by the British Standards Institution.
The equipment is also certified in compliance with applicable standards by various national bodies.
The equipment was tested and is certified by the New Zealand Ministry of Commerce and the
Australian Communications Authority in conformance with CISPR pub. 14/(1993) AS/NZS 1044/(1995),
which relates to radio frequency interference regulations.
Note: Machines intended for use in South Korea and Taiwan have been certified separately in
compliance with the requirements.
Any unauthorized alteration which includes the additions of new functions or the connection of external
devices may impact this certification.
Contact your local Xerox representative for a list of approved accessories.
Important
This manual is copyrighted with all rights reserved. Under the copyright laws, this manual may not be copied, in
whole or part, without the written consent of the publisher.
Parts of this manual are subject to change without prior notice.
We welcome any comments on ambiguities, errors, omissions, or missing pages.
Never attempt any procedure on the machine that is not specifically described in this guide. Unauthorized
operation can cause faults or accidents. Fuji Xerox is not liable for any problems resulting from unauthorized
operation of the equipment.
The Document Company is a trademark and may be registered in certain jurisdictions.
XEROX is a registered trademark.