Punching Holes (Punching) - Xerox Document Centre 706 Series User Manual

G G
Basic Features
G The machine will stop punching
holes once the punch scrap
container is full. See 8-7 Emptying
the Punch Scrap Container for
details.
G Punching and Large Output
cannot be selected for interrupting
copy job.
4
76

4-9 Punching Holes (Punching)

Punching Holes
When the finisher (optional) is installed, copies can be made and output with
punched holes. Paper sizes that can be punched and the positions of holes
are as follows.
G Paper sizes that can be punched and the positions of holes
B5 , A4 , 8.5 x 11"
B4, A3, 11 x 17" paper: Holes are punched at the short edge.
B5 , A4 , 8.5 x 11"
For B5 , A4 , 8.5 x 11"
For B4, A3, 11 x 17" size, holes cannot be punched on the long edge.
Also, when punching B5 , A4 , 8.5 x 11"
orientation is loaded in the tray.
G Punching holes on paper of mixed sizes (applicable only when DADF is
used):
When Y is the same for paper of mixed sizes, punching holes is possible
However, only the following combinations are possible: B5
and A3, 8.5 x 11"
paper: Holes are punched at the long edge.
size, holes cannot be punched on the short edge.
size paper, check that the paper of
and 11 x 17".
(Punching)
B4, A3, 11 x 17"
and B4, A4