Xerox Document Centre 706 Series User Manual page 11

Read these safety notes carefully before using this product to ensure that you operate the machine properly.
This section explains the graphic symbols used throughout this guide.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
This symbol is used to alert operators to a specific operating
procedure that requires close attention. Read and follow
instructions carefully to ensure the task is accomplished safely.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
This symbol is used to alert operators to a specific operating
procedure that must not be performed. Read and follow
instructions carefully.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
This symbol is used to alert operators to a specific operating
procedure that should be emphasised for operating safety.
Read instructions carefully before performing the required
procedure.
Precautions for installation and relocation
Do not place the machine in a hot, humid, dusty,
or poorly ventilated environment. Prolonged
exposure to these adverse conditions can cause
fire or electric shocks.
Do not place the machine near heaters or
volatile, flammable, or combustible materials
such as curtains that may catch fire.
Place the machine on a level and sturdy surface
that can withstand the machine weight of 190 kg.
If tilted, the machine may fall over and cause
injuries.
When relocating the machine, contact your
Xerox Customer Support Centre.
Safety Notes
is used to alert operators to an operating procedure, practice, or condition that, if
not strictly observed, may result in severe injury or loss of life.
is used to alert operators to an operating procedure, practice, or condition that, if
not strictly observed, might result in safety hazards to personnel or damage to the
equipment.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
The machine has ventilation holes on its bottom.
A poorly ventilated machine can cause
excessive internal heat and fire.
The accompanying diagram shows the minimum
clearances required for normal operation,
consumables replacement, and maintenance to
ensure your machine operates at peak
performance. Your Xerox Representative will
provide necessary support for the proper
installation of the machine.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Heated Flammable Electric
surface shock
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Prohibited No fire Do not
tear down
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Instructions Unplug Ground/
Earth
○ ○ ○ ○ ○ ○ ○
Pinched
fingers
○ ○ ○ ○ ○ ○ ○
Do not
touch
○ ○ ○ ○ ○ ○ ○
ix