Table of Contents
Advertisement
G
G
Custom Presets
G You can also select the basic button
directly by touching it.
G The buttons are displayed on two
pages. Use L or M to page up or
page down.
G Select No Feature if you do not wish to
assign any feature to the button.
G Buttons that are unavailable are dim
and grey in colour.
G The screen on the right has the
finisher installed.
6
164
6-3 Configuring the Machine with Tools Mode
Use the L M buttons to select the desired basic button.
Select Change Settings.
Select the feature to be displayed in the selected basic button
and select Save.
For example, select Original Type.
Repeat Steps 6 to 8 when necessary to assign the required
features to all the basic buttons.
Select Close until the screen shown in Step 4 is displayed.
Select Exit Tools.
Advertisement
Table of Contents
