Table of Contents
Advertisement
G
Loading Documents
G Edge Erase/Copy All is not available
when copying some types of
documents.
3
Loading documents in the DADF
G Do not load any documents that
have correction fluid or carbon on
them.
40
3-1 Documents
G
Documents
Place document on the document glass or load it in the Duplex Automatic
Document Feeder (DADF).
Place the following types of documents on the document glass. They will
cause jams when loaded in the DADF.
G Documents that are relatively heavy, for example, brochures and booklets
G Torn, wrinkled, paste-up, punched-hole, folded or curled documents
G Paper-clipped or stapled documents
G Documents with carbon on the reverse side
G Highly transparent documents such as transparencies and tracing paper
that have been pencilled
G Heat-sensitive paper
Observe the precautions described in the following sections when loading
documents in the DADF or when placing them on the document glass.
G Do not hold on to a document while it is being fed into the scanner. This
may cause a document misfeed.
G Do not allow excessive sheets of documents to accumulate in the
document tray. Never place anything on the document tray as it may
result in a document jam.
G When opening the DADF, gently lift it up until it stops. Never force it up.
G The DADF cannot detect the size of transparencies and tracing paper.
G The DADF accepts the following types of documents.
Advertisement
Table of Contents
