CHASSIS
7.1.25 REMOVING
THE
FAIRING MOUNT
Carefully read 1.3.9 (PRECAUTIONS AND GENERAL
INFORMATION).
Remove both side fairings, see 7.1.28 (REMOVING
THE SIDE FAIRINGS).
Remove the front fairing, see 7.1.20 (REMOVING THE
FRONT FAIRING).
Unscrew and remove the two screws (1), saving the
two nuts.
Tightening torque for screws (1): 1.4 ftlb (2 Nm).
Remove the fuse box (2).
Uncouple the two light relays (3), flasher (4) and the
overturn sensor (5), leaving them connected to the
wiring.
WARNING
Replace the grommets if damaged.
Unscrew and remove the two nuts (7).
Tightening torque for nuts (7): 7.3 ftlb (10 Nm).
Remove the two screws (8).
Remove the dashboard/front fairing mount (6).
7
- 24 -
00
DASHBOARD/FRONT
1
1
2
4
3
7
6
RST mille
USA
5
3
8
Release 00/2002 - 03