FUEL SYSTEM
4.4 REMOVING THE FUEL LEVEL SENSOR
Remove the complete fuel intake pump unit, see 4.3
(COMPLETELY REMOVING THE FUEL INTAKE
PUMP UNIT).
Disconnect the electrical connector (1).
WARNING
When
reassembling,
connector (1) is fitted properly.
Use a screwdriver to help you remove the fuel level
sensor (2) from the support (3).
4.5 REMOVING THE FUEL DELIVERY FILTER
Remove the complete fuel intake pump unit, see 4.3
(COMPLETELY REMOVING THE FUEL INTAKE
PUMP UNIT).
Unscrew and remove the screw (6) to free the
grounding cable.
NOTE
Use the special click clamp installation pliers
(code 0277295); during reassembly, replace each clamp
with a new one of the same kind.
Release the click clamp (1-2).
Slide the hose (3) off the filter (4).
Slide the filter (4) off the hose (5).
WARNING
Do not re-use filters.
Replace the filter (4) with another of the same kind.
4
- 6 -
00
make
sure
the
electrical
RST mille
1
3
6
Release 00/2002 - 03
USA
2
3
1
4
2
5