RST mille
USA
7.6.5 REMOVING THE BRAKE MASTER CYLINDER
Remove
the
right
(REMOVING THE LOWER FAIRING).
Carry out the first three steps described in the
paragraph see 2.22 (CHANGING THE REAR BRAKE
FLUID).
When all the fluid has drained out, unscrew and
remove the screw (1) and retrieve the two seals.
Tightening torque for screw (1): 14.5 ftlb (20 Nm).
Loosen and remove the click clamp (2).
Pull the hose (3) from the fitting on the master cylinder.
Unscrew and remove the two screws (4).
Tightening torque for screws (4): 7.3 ftlb (10 Nm).
Retrieve the guard (5).
Slide the master cylinder (6) out.
NOTE
When reassembling top up brake fluid, see 2.17
(CHECKING AND TOPPING UP THE REAR BRAKE
FLUID)
and
bleed
the
(BLEEDING THE BRAKE SYSTEMS).
Release 00/2002 - 03
lower
fairing,
see 7.1.33
brake
system,
see 2.19
1
2
3
5
4
6
2
7
3
- 73 -
00