ENGINE
3.1.9 GENERAL
INFORMATION
MAINTENANCE AND REPAIRS
Carefully read 0.5.1 (PRECAUTIONS AND GENERAL
INFORMATION).
3.2 ENGINE COMPONENTS THAT MAY BE
DISASSEMBLED WITHOUT REMOVING
THE ENGINE FROM THE FRAME
Carefully read 1.3.9 (PRECAUTIONS AND GENERAL
INFORMATION).
The parts listed below may be removed and reinstalled
without removing the engine from the frame.
WARNING
This chapter lists the procedures progressively and
in sequential order.
Use common sense to interpret any overlap in cross-
referenced instructions, to avoid unnecessarily
removing components.
Perform only those operations needed to remove the
component in question.
TOP
- Tappet cover (1), see 0.4.1 (ENGINE SERVICE
MANUAL).
- Tappet cover (2), head, cylinder and rear piston,
see 0.4.1 (ENGINE SERVICE MANUAL).
- Front (3) and rear (4) intake cylinder manifolds.
- Camshaft position sensor and camshafts, see 0.4.1
(ENGINE SERVICE MANUAL).
- Chain, chain tightener and front and rear cylinder
timing drive assembly, see 0.4.1 (ENGINE SERVICE
MANUAL).
- Valves, see 0.4.1 (ENGINE SERVICE MANUAL).
FRONT
- Front cylinder exhaust pipe, see 7.1.53 (REMOVING
THE EXHAUST MANIFOLDS).
- Starter motor (5), see 0.4.1 (ENGINE SERVICE
MANUAL).
REAR
- Exhaust pipe removal, see 7.1.53 (REMOVING THE
EXHAUST MANIFOLDS).
3
- 4 -
00
ABOUT
RST mille
USA
Release 00/2002 - 03