CHASSIS
7.1.31 REMOVING THE RIGHT AIR DUCT
Carry out the first three steps described in the
paragraph
7.1.30 (REMOVING THE LEFT AIR
DUCT).
Unscrew and remove the ten screws (1).
Tightening torque for screws (1): 1.4 ftlb (2 Nm).
Unscrew and remove the screw (2).
Tightening torque for screws (2): 3.6 ftlb (5 Nm).
Remove the right air duct (3).
7.1.32 REMOVING THE FRONT FAIRING LOWER
LOCKUP
Carefully read 1.3.9 (PRECAUTIONS AND GENERAL
INFORMATION).
Place the vehicle on the center stand.
Unscrew and remove the three screws (1).
Tightening torque for screws (1): 3.6 ftlb (5 Nm).
WARNING
Be very careful to avoid damaging the brake lines.
Nudge the front fairing lower lockup (1) until you find
the best position for sliding it out.
Remove the front fairing lower lockup (2).
7
- 28 -
00
1
2
3
1
2
1
RST mille
USA
1
1
1
1
Release 00/2002 - 03