Finalizing the Installation
LP Conversion Instructions
Install the conversion kit prior to installing the gas line to ensure proper gas use.
1
Remove the glass (see page 40). Remove the logs and coals (if installed - page 43)
2
Remove the ember tray and burner tray cover (see the illustration below).
Remove this clip on
the firebox floor.
Remove the ember
tray and the burner
tray cover.
© Travis Industries
Loosen the screw and remove the clip located on
the firebox ceiling on the front left side.
b
c
(for qualified installers only)
a
4090807
51
Figure 30
100-01193_003