Using The Reset Rod To Activate The Receiver Module; Installation (Continued) - Travis Industries 1080 CF Installation Manual

Using the Reset Rod to Activate the Receiver Module

A reset rod is included in the owner's pack to allow the receiver module to be reset externally.
With the glass removed, locate the two index holes to the left side of the firebox. Shine a flashlght
into the cavity to better illuminate the second hole.
Slide the reset rod through the index holes. The rod will line up with the reset ("Learn") button on
the receiver module. Press lightly on the rod to activate the button.
Receiver
Module (with
Cover Box
removed)
Reset Rod
© Travis Industries
Installation
(for qualified installers only)
When done, hang the reset rod in
the gap behind the glass frame.
4090807
25
Index Holes
100-01193_003