Toshiba Magnia Z310 User Manual page 408

Display
ALARM (60)
Ex. Device Bay1 +5.0V high.
ALARM (61)
Ex. Device Bay1 +12.0V low.
ALARM (62)
Ex. Device Bay1 +12.0V high.
ALARM (63)
Ex. Device Bay1 FAN1 RPM slow.
ALARM (64)
Ex. Device Bay1 AC lost.
ALARM (65)
Ex. Device Bay1 power sag.
ALARM (66)
Ex. Device Bay1 fuse blow out.
ALARM (67)
Ex. Device Bay1 temp high.
ALARM (68)
Ex. Device Bay1 fuse blow out.
ALARM (69)
Ex. Device Bay2 +3.3V standby low.
ALARM (70)
Ex. Device Bay2 +3.3V standby high.
ALARM (71)
Ex. Device Bay2 +5.0V low.
ALARM (72)
Ex. Device Bay2 +5.0V high.
ALARM (73)
Ex. Device Bay2 +12.0V low.
ALARM (74)
Ex. Device Bay2 +12.0V high.
ALARM (75)
Ex. Device Bay2 FAN1 RPM slow.
ALARM (76)
Ex. Device Bay2 AC lost.
ALARM (77)
Ex. Device Bay2 power sag.
ALARM (78)
Ex. Device Bay2 power supply fault.
ALARM (79)
Ex. Device Bay2 temp high.
ALARM (80)
Ex. Device Bay2 fuse blow out.
Meaning of Message
High voltage error of External Device Bay Unit 1+5.0V power
supply.
Low voltage error of External Device Bay Unit 1+12.0V
power supply.
High voltage error of External Device Bay Unit 1+12.0V
power supply.
The External Device Bay Unit 1 fan 1 slow rpm error has
occurred.
Power interruption reset was detected on External Device
Bay Unit 1.
Momentary power interruption was detected on External
Device Bay Unit 1.
The External Device Bay Unit 1 power supply error.
The External Device Bay Unit 1 high temperature error.
The External Device Bay Unit 1 fuse has blown.
Low voltage error of External Device Bay Unit 2+3.3V
standby power supply.
High voltage error of External Device Bay Unit 2+3.3V
standby power supply.
Low voltage error of External Device Bay Unit 2+5.0V power
supply.
High voltage error of External Device Bay Unit 2+5.0V power
supply.
Low voltage error of External Device Bay Unit 2+12.0V
power supply.
High voltage error of External Device Bay Unit 2+12.0V
power supply.
The External Device Bay Unit 2 fan 1 slow rpm error has
occurred.
Power interruption reset was detected on External Device
Bay Unit 2.
Momentary power interruption was detected on External
Device Bay Unit 2.
The External Device Bay Unit 2 fuse has blown.
The External Device Bay 2 high temperature error has
occurred.
The External Device Bay 2 fuse has blown.
408