Table of Contents
Advertisement
Management Software
4
Enter Y.
Complete! displays, and the Setup Remote Management Setup Menu screen
displays.
NOTE: If you enter N for either Change LANx IP Address or Change LANx IP
Address Really, the selection displays again.
5
Select 3 or 4 to set up the subnet mask.
The current information displays.
*** Setup LANx Subnet Mask ***
Current LANx Subnet Mask = nnn.nnn.nnn.nnn
Change LANx Subnet Mask? [y/n]
Current LANx Subnet Mask
Please Input (xxx.xxx.xxx.xxx)>>
Change LANx Subnet Mask Really? [y/n]
6
Enter Y at Change LANx IP Subnet Mask? [y/n], and enter the new subnet mask at
Please Input (xxx.xxx.xxx.xxx)>>.
Change LANx Subnet Mask Really [y/n]? displays.
7
Enter Y.
Complete! displays, and the Setup Remote Management Setup Menu screen
displays.
NOTE: If you enter N for either Change LANx Subnet Mask or Change LANx IP
Subnet Mask Really, the selection displays again.
8
Press Esc.
The system restarts.
Remote Management and Front Panel Display Setup Tool
>> nnn.nnn.nnn.nnn
324
Advertisement
Table of Contents
Troubleshooting
