Toshiba Magnia Z310 User Manual page 119

Expansion Device Setup
3 Pull out the HDD slot spacer if you are adding a hard disk drive.
Or, if you are replacing a hard disk drive, while holding the disk tray, carefully remove
the hard disk drive by gently sliding it toward you.
CAUTION: The hard disk drive generates heat when in use. To avoid burns, hold
the disk tray when removing the hard disk drive.
Pulling out the hard disk drive
4 Push the new hard disk drive into the slot.
Installing the hard disk drive
5 Push in the retention lever and secure it.
Securing the retention lever
Installing a SCSI Hard Disk Drive (HDD) - External Hard Drive Unit Z1
119