Snmp Settings For Linux - Toshiba Magnia Z310 User Manual

Software Access Point
5 Add the community name of the READ WRITE authority to Accepted Community
Names.
The community name is used to connect the Access Point Configuration Utility to the
server (access point).

SNMP Settings For Linux

In order to communicate with an Access Point Configuration Utility (the Windows
version), it is necessary to install SNMP Agent.
The settings for communication with the Access Point Configuration Utility are as follows.
1 Access the following URL from the WEB browser.
http://(server IP address)/tsb/tsb_snmp.cgi
2 The following setup page displays.
NOTE: The setup page that can be accessed by the above URL operates under the
assumption that the WEB server (apache), attached as a standard feature, is
operating without any setting changes. If the WEB server's settings have been
changed, an access failure or abnormal operation may occur. For the WEB server
settings, consult with your server administrator.
367
SNMP Settings