Expansion Device Setup
Power
button
System status indicators
This unit has two operating status LED indicators on the front panel.
System status indicators
Indicator
Power
Fault
Press this button to turn the External Hard Drive Z1 on or off. Press
the button once to start the drive. Press the button again to shut off
the drive.
Power indicator (
)
Fault indicator (
Status
Off
AC power is not being supplied to the unit
Amber
AC power is being supplied, but the unit is
turned off
Green
The unit is running normally
Off
Out of operation (AC power not supplied),
or disk drive cannot be accessed
Amber
I/O device, fan, or power supply unit out of
operation
External Device Bay Unit Z1 - Front View
)
Meaning
122