Maintenance Console Operating Instructions; Installing And Starting The Maintenance Console - Panasonic Pure IP-PBX KX-TDE100 Programming Manual

2.1.1 Installing and Starting the Maintenance Console

2.1 Maintenance Console Operating Instructions

2.1.1 Installing and Starting the Maintenance Console
System programming, diagnosis and administration for the V-SIPGW16 card can be performed with a PC using
the Maintenance Console. This section describes how to install and start the Maintenance Console.
System Requirements
Required Operating System
•
Microsoft Windows
®
Minimum Hardware Requirements
•
HDD: 100 MB of available hard disk space
Recommended Display Settings
• Screen resolution: XGA (1024 ´ 768)
•
DPI setting: Normal size (96 DPI)
Hardware Requirements
•
Make sure that the PBX, IPCMPR (for KX-TDE100/KX-TDE200)/IPCEMPR (for KX-TDE600) card, and
DSP card are installed.
•
Make sure that the PBX is fully connected to your PC.
Note
For details about installation, refer to "Section 3 Installation" in the Installation Manual.
Trademarks
•
Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
•
Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation.
•
All other trademarks identified herein are the property of their respective owners.
Copyright for MD5
This software uses the Source Code of RSA Data Security, Inc. described in the RFC1321
(MD5Message-Digest Algorithm).
Copyright (C) 1991-2, RSA Data Security, Inc. Created 1991. All rights reserved.
Licence to copy and use this software is granted provided that it is identified as the "RSA Data Security, Inc.
MD5 Message-Digest Algorithm" in all material mentioning or referencing this software or this function.
Licence is also granted to make and use derivative works provided that such works are identified as "derived
from the RSA Data Security, Inc. MD5 Message-Digest Algorithm" in all material mentioning or referencing the
derived work.
12 Programming Manual for Virtual SIP Trunk Card
XP or Windows Vista
®
Business operating system
®