Pbx Configuration-[1-1] Configuration-Slot-Card Property - Bri Type/Pri Type - Panasonic KX-NS1000 Pc Programming Manual

9.26 PBX Configuration—[1-1] Configuration—Slot—Card Property - BRI type/PRI type
9.26 PBX Configuration—[1-1]
Configuration—Slot—Card Property - BRI type/PRI
type
The properties of the BRI or PRI card can be specified.
ISDN CO / QSIG Master / QSIG Slave—T200
Specifies the maximum time that the PBX waits for a reply after sending the L2 command to ISDN.
Value Range
0–600 ´ 100 ms
Maintenance Console Location
9.26 PBX Configuration—[1-1] Configuration—Slot—Card Property - BRI type/PRI type
ISDN CO / QSIG Master / QSIG Slave—T202
Specifies the maximum time that the PBX waits for a reply after resending the request to use an ISDN line as
a TIE line.
Value Range
0–600 ´ 100 ms
Maintenance Console Location
9.26 PBX Configuration—[1-1] Configuration—Slot—Card Property - BRI type/PRI type
Feature Guide References
4.3.1 TIE Line Service
ISDN CO / QSIG Master / QSIG Slave—T203
Specifies the length of time to detect no communication status of L2.
Value Range
0–600 ´ 100 ms
Maintenance Console Location
9.26 PBX Configuration—[1-1] Configuration—Slot—Card Property - BRI type/PRI type
ISDN CO / QSIG Master / QSIG Slave—T301
Specifies the maximum time that the PBX waits for a reply after making a call to ISDN.
352 PC Programming Manual