Disarm One Or More Partitions; Activate Sos Feature - Interlogix xgen Installation & Programming Manual

Disarm One Or More Partitions

Touch the Off or Off + button to arm your system in Away mode:
If your system has multi-Partition control enabled, the Off + button will be
displayed.
A valid PIN code will need to be entered to determine what permissions they
have, this includes which Partitions and at what time/day that user has access.

Activate SOS Feature

Touch the SOS button to display the SOS feature:
On this screen touch and hold the appropriate button for 2 seconds to activate
Manual Fire Alarm, Manual Medical Alarm, or Manual Panic Alarm.
Depending on how your system is programmed, the control room may receive
the corresponding event. Check with your control room to determine what action
will be taken.
If silent alarm is enabled, then the keypad will not display any signs that the panic
button was pressed.
To cancel a SOS alarm – return to the home screen, touch the Status button and
turn the Partition off.
xGen Installation & Programming Guide 49