Programming Instructions For Users - Interlogix xgen Installation & Programming Manual

Then assign that schedule to the User:

Programming Instructions for Users

Goal
Add/Edit/Remove users from your xGen system.
Pre-conditions
 Have programmed or customized Permissions. Alternatively you can use
the presets.
 Have programmed or customized Schedules. Alternatively you can use
the presets.
Notes
PIN codes must be unique across the system, no two users can share the
same PIN code.
PIN codes must be 4 to 8 digits in length.
Note: EN 50131 Grade 2 Required settings 5 digits minimum
User name must be assigned to give that user access to UltraConnect app
or xGen Web Server. A user with no first name will be unable to gain
remote access.
The default installer account is User 256 with user name installer and PIN
9713, with Master Engineer user type. These details are used to login to
the xGen Web Server web pages and UltraConnect app.
The default master account is "User 1" and PIN 1234
The default standard account is "User 2" and PIN 5678
68 xGen Installation & Programming Guide