Programming With Presets - Interlogix xgen Installation & Programming Manual

Create your own presets by assigning a name for the settings you most
commonly use. This will save you time when programming and maintaining the
system.

Programming with Presets

Use presets to configure the first 10 menus for faster setup:
Menu 1 - User
Menu 2 - System Options
Menu 3 - Zones
Menu 4 - Partitions
Menu 5 - Channels
Menu 6 - Communicator
Menu 7 – Schedules
Menu 8 – Actions
Menu 9 – Arm-Disarm Number
Menu 10 – Devices
xGen is fully customizable for maximum flexibility. Should a preset not be
available for your requirements then Menus 11 and higher provide access to
more detailed programming settings.
When naming presets and labels, the following characters cannot be used ? = %
& " / < > ;
54 xGen Installation & Programming Guide