Quick Start Guide - Interlogix xgen Installation & Programming Manual

Quick Start Guide

Short form programming sheet for a monitored system
This is not a substitute for reading the manual
1. Hard Default Panel
2. Soft Default Panel
3. Go To Program Mode
4. Change Program Code
5. Duress Code
6. System Options
7. System Timers
8. Program Zones
9. Program Partitions
10. Reporting
11. Set up Receiver Phone #1
12. Set up Receiver Phone #2
13. Communicator
14. Download Access Code
15. Download Control (Remote Access)
16. Autotest
17. Medical Alarm Sounder "ON"
18. Auto Test Control
19. Exit Program Mode
20. Change Master Code (default 1234)
21. Program User Codes
22. Set Date & Time
23. Test
24. Train Client/End User
Note: If testing reporting, master code does not send open/closing reports by default (see
Feature 2).
56
Unplug battery & remove power, turn on power,
Enter 971300 within 10 seconds,
Login to web console,
shortcut 910.910, wait 12 seconds
Menu
Menu, Users
System, System and Siren Options,
DEOL, Box Tamper
Siren, Strobe, Phone Fault, AC Fail
Zones, use presets for type, options, and
assigning Partitions
Partitions, Partition 1 name, Force Arm,
Partition Entry/Exit Timers
Partition 1, Partition Reporting,
Account Number and Channel Group
Communicator, Channel 1, Account Code,
Format, Phone/Email,
Event List 1
Communicator, Channel 2, Account Code,
Format, Phone/Email,
Event List 1
Communicator, IP Config
Communicator, Remote Access
Communicator, IP Config
Users
Communicator, IP Config
or manually set in System, System Clock
Testing, Walk Test, Siren Test,
Communicator Test
xGen Installation & Programming Guide