Add Keyfobs; More About Users - Interlogix zerowire User Manual

Add Keyfobs

Keyfobs require special programming depending on your requirements. Contact your
security provider to purchase additional keyfobs.

More About Users

ZeroWire supports up to 40 users. For simplicity it is recommended you create user
numbers from 1-40. For advanced programming you can create user numbers 1-999.
Each user is assigned a PIN code and a user number. This allows them to interact with the
system.
PIN codes must be four (4) to eight (8) digits in length. Longer length PIN codes provide
greater security as they are harder to guess. Every user must have a unique PIN code.
Keep user PIN information in a safe place, do not disclose your PIN to others.
Users can have a recorded name to make it easier to manage users. See Record User
Names on page 29 for instruction to do this.
Users created on the physical ZeroWire unit via the menus will not be assigned a
username. These users will not have remote access to the ZeroWire (e.g. over the internet
or using the smartphone app). If you wish to give remote access to a user then you must
assign a username via ZeroWire Web Server (see User Name and PIN on page 21) or
DLX900 desktop software.
If you have many users to add you may find it is easier to use ZeroWire Web Server or
DLX900 desktop software. These are installer tools, refer to the Installation Manual for
instructions.
Notes:
• IMPORTANT: Change the default PIN codes of the installer and User1 accounts.
• The system must be disarmed before accessing user configuration from the ZeroWire
unit. You may use the ZeroWire Web Server or UltraConnect app to access user
configuration at any time.
ZeroWire User Manual 13