Combining Actions With Schedules - Interlogix xgen Installation & Programming Manual

Write/Plan out on paper what you want to create. This makes it easier to set up
Actions and associated settings.
Actions can be used without programming an Action Result. For example,
outputs on xGen are controlled by monitoring an Action State, no Action Result
needs to be programmed.
Menu Overview
8. Actions
Instructions
1. Select the Device that has the physical outputs you want to control
2. Select Outputs
3. Select Action
4. Select the Schedule

Combining Actions with Schedules

Schedules can control when a user has access, when an automatic Arm-Disarm
occurs, when devices can be used, and more. By adding Actions a Schedule can
be turned on or off based on when certain events occur.
Action
Events
The outcome is that we can control Users, Permissions, Partitions, Zones,
Actions, Arm-Disarm, Scenes, and Devices, based on various system conditions.
This provides powerful automation features that allow the system to respond in
real-time to changing conditions.
This functionality is achieved by going to that Schedule, and selecting Follow
Action Number.
xGen Installation & Programming Guide
7. Schedules
14. Holidays
Action
control
State
controls
Schedule
ON/OFF
Action
+
Result
controls
User, Permissions, Partition, Zones,
Actions, Arm-Disarm, Scenes, and Devices
10. Devices
Outputs
zone expanders, keypads,
transmitters
11. Permissions
7. Schedules
115