Multifunction Switch F125; Removing Multifunction Switch F125 - Volkswagen Golf Variant 2007 Workshop Manual

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
6-speed automatic gearbox 09G - Edition 04.2010
3 Multifunction switch -F125-
Removing multifunction switch -F125-
Installing multifunction switch -F125-
Adjusting multifunction switch -F125-
3.1 Removing multifunction switch -F125-
Carry out procedure as follows:
– Move selector lever to position "N".
– Switch off ignition.
– In order to remove selector lever cable from gearbox, first re‐
lease cable -arrows 1- and then remove it from cable support
bracket -arrow 2-.
Note
Do not use any pliers, otherwise securing tabs on cable sup‐
♦
port bracket could break off.
Do not bend or kink selector lever cable.
♦
– Lever cable -1- off lever -3- using an open jaw spanner -2-.
– Pull connector off multifunction switch -F125- .
– Unscrew nut -1-.
– Remove spring ring -2- and lever -3- from selector shaft -4-.
18
Rep. Gr.37 - Controls, housing
⇒ page 18
⇒ page 19
⇒ page 20