Volkswagen Golf Variant 2007 Workshop Manual page 64

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
6-speed automatic gearbox 09G - Edition 04.2010
– If present, remove earth strap from bracket -A-.
– Remove 2 securing bolts for gearbox mounting on bracket
-A- and 4 bolts for bracket on gearbox.
The bracket is removed later.
– Depress brake pedal to remove bolt for left drive shaft
-arrow- (second mechanic required).
Note
After this, do not set vehicle on the ground any more ⇒ Rep. Gr.
40 ; Repairing drive shafts; Removing and installing drive shafts .
– Raise vehicle and remove front wheels.
– Remove noise insulation tray.
– Remove front left wheel housing liner ⇒ Rep. Gr. 66 ; Wheel
housing liner; front wheel housing liner .
For vehicles with power steering
– Remove brackets with power assisted steering line from gear‐
box.
Continuation for all vehicles
– Now pull electrical connectors -1- and -2- off gearbox.
– Remove starter ⇒ Rep. Gr. 27 ; Removing and installing
starter .
– Separate exhaust system at double clamp and remove ex‐
haust pipe bracket from subframe ⇒ Rep. Gr. 26 ; Removing
and installing parts of exhaust system .
– Remove ⇒ pendulum support, first bolt -A- and then bolts
-B-.
Note
When installing, first tighten bolts -B-, then bolt -A-, torque set‐
tings ⇒ Rep. Gr. 40 ; Assembly overview - subframe, anti-roll
bar, suspension links .
60
Rep. Gr.37 - Controls, housing