Volkswagen Golf Variant 2007 Workshop Manual page 18

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
6-speed automatic gearbox 09G - Edition 04.2010
❑ Location ⇒ page 16
❑ Removing and installing
❑ Allocation ⇒ Electronic parts catalogue "ETKA"
8 - Hydraulic pressure sender 1 for automatic gearbox -G193-
❑ Not installed in all gearboxes
❑ Allocation ⇒ Electronic parts catalogue "ETKA"
❑ Location ⇒ page 16
9 - Hydraulic pressure sender 2 for automatic gearbox -G194-
❑ Not installed in all gearboxes
❑ Allocation ⇒ Electronic parts catalogue "ETKA"
❑ Location ⇒ page 16
10 - Gearbox input speed sender -G182-
❑ Location ⇒ page 17
❑ Removing and installing
❑ Can be checked using "guided fault finding" of -VAS 5051-
11 - Gearbox output speed sender -G195-
❑ Location ⇒ page 17
❑ Removing and installing
❑ Can be checked using "guided fault finding" of -VAS 5051-
12 - Selector lever lock solenoid -N110-
❑ Location: selector lever lock solenoid is located in the selector mechanism.
❑ Can be checked using "guided fault finding" of -VAS 5051-
13 - Tiptronic switch -F189-
❑ Location ⇒ page 17
❑ Can be checked using "guided fault finding" of -VAS 5051-
14 - Terminal 50 voltage supply relay -J682-
❑ In E box in engine compartment ⇒ Current flow diagrams, Electrical fault finding and Fitting locations.
15 - Diagnostic connection
❑ Location ⇒ page 17
16 - Selector lever position display -Y6-
❑ Location ⇒ page 17
❑ Removing and installing ⇒ Electrical system; Rep. Gr. 90 ; Gauges, instruments; Dash panel insert .
Automatic gearbox control unit -J217- -arrow- in Jetta 2005 ▸,
Bora 2006 ▸, Golf Variant 2007 ▸, Jetta Wagon 2008 ▸
Location: control unit is located in front left wheel housing.
– Wheel housing liner must be removed for removing and in‐
stalling.
14
Rep. Gr.37 - Controls, housing
⇒ page 103
⇒ page 106
⇒ page 107