Volkswagen Golf Variant 2007 Workshop Manual page 87

– Loosen oil pan bolts -arrows- diagonally.
– Remove oil pan together with gasket.
2.1.2 Installing
Install in the reverse order of removal, observing the following:
– Clean two magnets in recesses of oil pan. Make sure that
magnets make full contact with oil pan.
– Check that seal is undamaged and all spacer sleeves (qty. 8)
are present.
Otherwise renew seal.
– Fit oil sump with seal, taking care not to pinch any wires.
– Ensure proper seating of oil pan gasket.
– Tighten pan bolts -arrows- diagonally in several stages; torque
specification ⇒ page 89
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
6-speed automatic gearbox 09G - Edition 04.2010
.
83
2. ATF pan