Carry out procedure as follows:
– Place setting gauge on selector shaft -2- and turn multifunction
switch -1- until setting gauge engages in lug on multifunction
switch connector.
– Secure setting gauge on selector shaft -2- with bolt -3-.
– Tighten bolts -arrows- to 6 Nm.
– Remove setting gauge.
– Continue installation in reverse order of removal
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
6-speed automatic gearbox 09G - Edition 04.2010
⇒ page 19
.
3. Multifunction switch F125
21