Volkswagen Golf Variant 2007 Workshop Manual page 48

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
6-speed automatic gearbox 09G - Edition 04.2010
Note
On some smaller engines up to 1.6 litres, one of the lower
-bolts- can be backed out of the gearbox but not removed from
the hole.
– If this bolt has to be removed then remove front exhaust pipe
⇒ Rep. Gr. 26 ; Removing and installing parts of exhaust
system .
The hole for removing the torque converter nut is covered with a
rubber cap on the rear of the engine.
– Remove this cap.
– Remove six -torque converter nuts- with insert -V/175- .
Note
Continue turning the engine carefully!
– Before you now remove final connecting bolt, support gearbox
with engine and gearbox jack -V.A.G 1383 A- , gearbox sup‐
port -3282- and adjustment plate -3282 /36- .
– Secure gearbox to gearbox support -3282- using bolt -1-.
– Only now is the final bolt removed.
– Press gearbox off engine while simultaneously pressing tor‐
que converter out of drive plate of engine.
– Note clearance from subframe when lowering. If necessary,
readjust gearbox support -3282- slightly.
44
Rep. Gr.37 - Controls, housing