Installing Torque Converter - Volkswagen Golf Variant 2007 Workshop Manual

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
6-speed automatic gearbox 09G - Edition 04.2010
♦ Oil seal extractor lever -VW 681-
Removing
– Pry out seal with lever -VW 681- .
Installing
– Drive in seal flush thrust piece -T10175- .
1.4

Installing torque converter

– Carefully push on torque converter hub via oil seal to first stop.
– Turn torque converter towards gearbox using light pressure
until notch in hub -arrow- engages in follower of pump gear
and torque converter can be felt to slip in place.
The torque converter is properly inserted when it can easily be
turned by hand and is seated equally deep in gearbox around the
entire circumference.
Caution
If engine and gearbox are brought together with force because
the torque converter is improperly fitted, both gearbox and tor‐
que converter will be damaged.
10
Rep. Gr.32 - Torque converter