4.3
Removing and installing wiring harness
with 14-pin connector (for solenoid
valves)
4.3.1
Removing
– Remove oil pan
⇒ page 82
– Remove ATF strainer
– Draw a sketch of all senders and solenoid valves with their
respective connectors analogous to figure.
– Before separating connectors at solenoid valves, solenoid
valve and respective connector must be identified.
WARNING
This sketch and identification are absolutely vital to prevent in‐
advertently interchanging sender and solenoid valve connector
when reinstalling the wiring harness.
Under certain circumstances, interchanging connectors may
lead to destruction of the gearbox.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
.
⇒ page 85
.
6-speed automatic gearbox 09G - Edition 04.2010
103
4. Valve body