Volkswagen Golf Variant 2007 Workshop Manual page 77

7.5.1 Torque settings, Jetta 2011 with 2.0 l - 85 kW engine
- Drive plate to torque convert‐
er
❑ 60 Nm
❑ Qty. 6; remove and in‐
stall with insert -V/175- .
- M12 bolts ⇒ M12
❑ 80 Nm
❑ 65 Nm if you use socket
-T10179-
- M10 bolts ⇒ M10
❑ 40 Nm
❑ These bolts are located
in lower flange
- Two dowel sleeves in engine
-arrows-
– Make sure that bracket does not make contact with ATF cool‐
er.
-Nuts- 8 Nm
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
6-speed automatic gearbox 09G - Edition 04.2010
7. Removing and installing gearbox, Jetta 2011 ▸
73