Volkswagen Golf Variant 2007 Workshop Manual page 47

– If present, remove heat shield above right drive shaft
-arrows-.
– Press both drive shafts out of gearbox. This procedure is de‐
scribed in ⇒ Rep. Gr. 40 ; Repairing drive shafts; Removing
and installing drive shafts .
– Remove left drive shaft ⇒ Rep. Gr. 40 ; Repairing drive shafts;
Removing and installing drive shafts .
– Raise right shaft as far as possible and secure in this position.
– Now remove assembly mounting bracket. To do this, lower
engine and gearbox slightly via support bracket -10 - 222 A-
spindles.
4 turns are sufficient.
– If exhaust system retainer is present on gearbox, remove it.
– Remove lower engine/gearbox connecting bolts.
– Leave an easily accessible bolt installed for safety.
– Start with two lower bolts.
6. Removing and installing gearbox, Jetta 2005 ▸, Bora 2006 ▸, Golf Variant 2007 ▸, Jetta Wagon 2008 ▸
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
6-speed automatic gearbox 09G - Edition 04.2010
43