Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
6-speed automatic gearbox 09G - Edition 04.2010
4
Selector mechanism up to 02.2009
WARNING
Before working on vehicle with engine running, move selector
lever into position "P" and apply handbrake.
Selector mechanism from 03.2009 onwards
4.1
Overview of selector mechanism up to 02.2009
1 - Selector cover with knob
❑ Do not remove knob
without reason. For
emergency release, on‐
ly the cover needs to be
unclipped
⇒ page 31
❑ Before removing knob,
pull button out past its
pressure point. Secure
button with cable tie or
appropriate wire against
being pressed in. This
will prevent the button
from being accidentally
pressed into the knob.
❑ If button is pressed into
removed handle
–
Always pull out button
past the felt pressure
point before installing
knob.
2 - Selector mechanism with
selector lever
❑ Removing and installing
⇒ page 23
3 - Bolt with spring
❑ 3 Nm
4 - Pin
❑ Removing
⇒ page 23
❑ Do not grease
5 - Locking plate
❑ Always renew after re‐
moving
6 - Nut
❑ 9 Nm
❑ Qty. 4
7 - Selector housing
❑ With seal
8 - Selector lever cable
❑ Cable must not be greased
❑ Removing and installing
❑ Checking
⇒ page 30
22
Rep. Gr.37 - Controls, housing
⇒ page 35
.
⇒ page 23
.