Volkswagen Golf Variant 2007 Workshop Manual page 66

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
6-speed automatic gearbox 09G - Edition 04.2010
– Now remove assembly mounting bracket. To do this, lower
engine and gearbox slightly via support bracket -10 - 222 A-
spindles.
4 turns are sufficient.
– Remove lower connecting bolts between engine and gearbox.
– Leave an easily accessible bolt installed for safety.
The torque converter nut bore is concealed with a rubber cap on
the rear of the engine.
– Remove this cap.
– Remove six -torque converter nuts- with insert -V/175- .
Note
Continue turning the engine carefully!
– Before you now remove final connecting bolt, support gearbox
with engine and gearbox jack -V.A.G 1383 A- , gearbox sup‐
port -3282- and adjustment plate -3282 /36- .
– Secure gearbox to gearbox support -3282- using nut -1- at
double bolt.
– Only now is the final bolt removed.
– Press gearbox off engine while simultaneously pressing tor‐
que converter out of drive plate of engine.
– When lowering gearbox, guide it past power assisted steering
line and past subframe. If necessary, readjust gearbox support
-3282- slightly.
62
Rep. Gr.37 - Controls, housing