Volkswagen Golf Variant 2007 Workshop Manual page 71

– Remove cable retainer -1- from starter bolt -arrow-.
– Remove upper starter motor bolt.
– Remove upper engine/gearbox connecting bolts.
– Remove plenum chamber cover ⇒ Rep. Gr. 50 ; Plenum
chamber cover; Removing and installing plenum chamber
cover .
To support engine and gearbox:
– Remove cables -1- from transportation bracket -3-.
– Unbolt transportation bracket -3- from engine -2- and pull out
of eye -arrow-.
– Attach a shackle -10 - 222 A /12- in "this" eye.
– Set up support bracket -10 - 222 A- and support engine and
gearbox. Do not raise.
1 - -T40091 /3-
2 - -T40091 /1-
3 - -10-222 A /31-1-
4 - -10-222 A /12-
5 - -10-222 A /31-4-
6 - -10-222 A /31-3-
7 - -10-222 A /3-
8 - -10-222 A /7-
9 - -10-222 A /31-2-
10 - -10-222 A /10-
– Extend right hook -10 - 222 A /10- -no. 10- with adapter -10 -
222 A /7- -no. 8-.
The hook faces downwards and will later be hooked into the en‐
gine block.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
6-speed automatic gearbox 09G - Edition 04.2010
7. Removing and installing gearbox, Jetta 2011 ▸
67