Wiring harnesses -1-, -3-, -4- and -5- are not allowed to be trapped
by valve body.
– All bolts -arrows- for securing valve body must be inserted.
– Note different bolt lengths:
Bolts -arrows-
Bolts -arrows A-
Bolts -arrows B-
– Tighten brackets -1- and -2- for wiring harness hand-tight with
new bolts.
– Tighten remaining, new bolts for valve body -arrows-,
-arrows A- and -arrows B- hand-tight.
– If lines -3-, -5- and -9- are too short to be connected to senders
or bolted to intended points on valve body, they have been
incorrectly routed or trapped by valve body. Remove valve
body again and route cables correctly.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
6-speed automatic gearbox 09G - Edition 04.2010
M6×21
M6×16
M6×28
97
4. Valve body