Alignment Of The Horizontal Position Of; Left Eye - Sony SRX-T615 Installation Manual

4k digital projector

Hide thumbs Also See for SRX-T615:

Table of Contents

Mask processing

1. Open an [INSTALLATION] screen. (Refer to steps 1 to 3 in Section 2-4-1.)

[INSTALLATION] tab

Screen example

2. Click the "L/R Sync (Left)" radio button in [Image Select] of [SINGLE 3D ADJUST].

3. Double-click the adjustment point of the [MASKING ADJUST/EDGE BLENDING].

The adjustment screen is displayed.

4. Adjust the masking amount.

Click the adjustment point and adjust the horizontal and vertical directions using [+] and [_] buttons

or by direct entry.

. [+] : Setting value is increased.

. [_] : Setting value is decreased.

Click [Reset] to return to the original masking amount.

2-4-6. Alignment of the Horizontal Position of Image for Right Eye and Image for

1. Project a test pattern ("Frame Adjust"). (Refer to steps 1 to 4 in Section 2-4-1.)

2. Click the "Right" radio button in [Image Select] of [SINGLE 3D ADJUST].

3. Adjust the position of the image for the right eye in the horizontal direction in the [H Adjust] of the

[Position Adjust].

Screen example

SRX-T615

［MASKING ADJUST/EDGE BLENDING］

[SINGLE 3D ADJUST]

2-31 (E)

Table of Contents