Table of Contents
Advertisement
3D lens filter position (vertical direction) adjustment
1. Remove the four adjustment screws.
2. Move the 3D lens filters in the vertical direction by changing the attachment position of the adjust-
ment screws removed in step 1.
Adjustment
screws
3D lens filter tilt adjustment
1. Loosen the two adjustment screws.
2. Tilt the 3D lens filter.
3. Tighten the adjustment screws.
2-28 (E)
Adjustment
screws
Adjustment screw
(this screw is also attached on the other side.)
3D lens filter
Adjustment
screws
3D lens filters
Adjustment
screws
SRX-T615
Advertisement
Table of Contents
