Table of Contents
Advertisement
4 [AIR FILTER TIMER]
Displays and resets the operation time of air filter.
. [Filter Timer]:
Displays the operation time of the air filter on the panel duct.
. [RESET] button: Clicking the button, resets air filter timer.
5 [FAN CONTROL & INFORMATION]
Displays the information on the rotation frequency of a fan used in this unit and sets the cooling method.
The cooling method is set as described below.
During use of a 450 W lamp
. Installation at an altitude of 0 to 500 m: Set to "Mode1".
. Installation at an altitude of 501 to 1000 m: Set to "Mode2".
. Installation at an altitude of 1001 to 1500 m: Set to "Mode3".
t
When installing at an altitude of 1501 m or more, contact your local Sony Sales Office/Service Center.
During use of a 330 W lamp
. Installation at an altitude of 0 to 500 m: Set to "Mode1".
. Installation at an altitude of 501 to 1000 m: Set to "Mode2".
. Installation at an altitude of 1001 to 2000 m: Set to "Mode3".
t
When installing at an altitude of 2001 m or more, contact your local Sony Sales Office/Service Center.
6 [MAINTENANCE TIMER]
[Elapsed Timer]:
Displays the lighting time of a lamp.
[Operation Timer]: Displays the operating time including cooling.
7 [COLOR SPACE CONVERTER]
Adjusts the CSC. (Refer to Section 2-6.)
8 [VERSION INFORMATION]
Displays the version of this unit.
9 [ZONE] button
When the MAIN version is earlier than 3.19.0600, this button is not displayed.
Corrects the misregistration by adjusting R (Red), G (Green) and B (Blue) of the image.
(Refer to Section 2-5-1.)
2-12 (E)
SRX-T615
Advertisement
Table of Contents
