Table of Contents
Advertisement
4. [INSTALLATION] tab
Screen
[INSTALLATION] tab
1
5
example
2
1 [LENS CONTROL]
2 [LAMP POWER]
3 [TEST PATTERN]
4 [SINGLE 3D ADJUST]
5 [DISTORTION ADJUST 2D/DUAL 3D] (MAIN version 3.12.0530 or later)
1 [LENS CONTROL]
Adjusts the image projected on the screen.
. [Zoom] : Adjusts the size of an image. An image is expanded when you click the [+] button. It is
reduced when you click the [_] button.
. [Focus] : Adjusts a focus. A focus is adjusted to the distance place when you click the [+] button. It is
adjusted to the nearby place when you click the [_] button.
2 [LAMP POWER]
. [Lamp Power]:
. [Level1]/[Level2]/[Level3]: Switches the luminance adjustment filter on the image. Level 3 indicates
2-6 (E)
4
3
Can adjust the output of a light source lamp bulb in units of 0.1% between
80% and 100%. When a numeric value decreases, the image becomes dark
but the power consumption decreases. In this case, however, the power
consumption decreases. Clicking the [+] button, the numeric value in-
creases. Clicking the [_] button, the numeric value decreases.
the brightest state.
SRX-T615
Advertisement
Table of Contents
