Table of Contents
Advertisement
2-4-7. Image Mapping
When projecting the image from the server using the 3D lens, it is required to set the image mapping
according to the field angle of contents and the screen type.
1. Open an [INSTALLATION] screen. (Refer to steps 1 to 3 in Section 2-4-1.)
[INSTALLATION] tab
Screen example
[SINGLE 3D ADJUST]
2. Select the image mapping corresponding to the type of contents, the field angle of contents, and the
type of a screen in [SINGLE 3D ADJUST].
The image size can be adjusted using the [+] and [_] buttons of [Size] when you select the item
beginning with Scope.
SRX-T615
2-33 (E)
Advertisement
Table of Contents
