Table of Contents
Advertisement
2-2-4. PC Communication
The communication between this unit and PC is set.
[Projector Identifying]
Screen example
[PC Communication]
[Projector Identifying]: Sets this unit.
[Port No]:
Type the UDP port number.
[Interval]:
Select the packet transmission interval.
[Controlling PC Destination]: Sets the PC.
[Port No.]:
[Time-out]:
[Network Block Reboot]
[REBOOT] button: Click this button to reboot the network CPU.
n
After setting PC Communication, a reboot of the network CPU is required.
SRX-T615
[Controlling PC Destination]
Type the TCP port number.
Select the time of the communication time-out.
[Network Block Reboot]
2-17 (E)
Advertisement
Table of Contents
